Integra front spindles with 262 mm brakes (knuckles, calipers, rotors), booster, master cylinder and proportioning valve
into Civic EG

Important caveats

• Do not use 1990-1993 Integra (DA) front parts; the thread specifically warns against them.
• Do not use front spindles from a 1997-2001 Integra Type R: they are 5-lug with 282 mm rotors, so the EG's 4-lug wheels would no longer fit (well-established fact; not stated in the cited threads).
• If you also fit Integra rear discs, use a proportioning valve from a non-ABS Integra, del Sol or Civic that had rear discs, or the rears can lock under hard braking.
• ABS-equipped Integra parts may come with hoses that don't suit a non-ABS Civic; reuse the Civic hoses or fit braided lines.
• An alignment is needed after the spindle swap.
• No OEM part numbers were confirmed for this entry.