TL front knuckles, hubs, rotors and calipers (5-lug brake upgrade)
into Accord

UA5 TL 1999-2003
→
CG Accord 1998-2002

Yes: the TL front knuckles, hubs, rotors and calipers (5-lug brake upgrade) from the TL (1999-2003) fits the Accord (1998-2002) — difficult difficulty, no modifications listed.

Verdict
Fits.
Verified entry · no modifications listed
Verified ✓
Difficulty
Difficult
Mods
None
Category
Brakes

Installation notes

Yes — the front knuckles and brakes from a 1999-2003 Acura TL (UA5) fit a 1998-2002 Honda Accord (CG) and give a 5-lug conversion with larger 11.8-inch front rotors. In a 6thGenAccord thread, l1nd3n moved a 2001 Accord EX 4-cylinder to 2002 TL knuckles, rotors and calipers all round, plus the TL master cylinder and booster. In a separate DIY, the owner fitted 2003 TL Type-S front knuckles, pads, rotors and calipers to a 4-cylinder Accord, paired with Accord V6 rear brakes. The 'Brake Upgrade Options' thread also names the 2nd-gen TL brakes with TL knuckles as an upgrade.
Caution

Important caveats

  • This changes the bolt pattern to 5x114.3, so 4-lug wheels no longer fit.
  • Buy the ABS/speed sensors and parking-brake cables with the donor parts; reusing the old ones caused problems for l1nd3n.
  • l1nd3n later fitted RL-sized pads to Legend calipers, and they were too wide for the TL rotor and wore a groove; use pads matched to the TL rotor.
  • Front and rear rotor sizes change, so check brake balance (master cylinder/proportioning valve) after the swap.

No guide yet — write one or browse all guides.

Reference

Done this swap?

Verify it and help the next builder.

Verified by 0 builders

Sources

3 refs
  1. 01 https://www.6thgenaccord.com/forums/posts/1048361/
  2. 02 https://www.6thgenaccord.com/forums/threads/diy-4-to-5-lug-swap-with-tl-s-fronts.48380/
  3. 03 https://www.6thgenaccord.com/forums/goto/post?id=1094057
Submitted by FitMyBuild research Added Updated

Not the swap you need? Request one →

Comments

(0)
Loading comments…