H22A1 engine and manual transmission
into Accord (from Prelude VTEC)

BB1 Prelude VTEC 1993-1996
→
CD7 Accord 1994-1997

Yes: the H22A1 engine and manual transmission from the Prelude VTEC (1993-1996) fits the Accord (1994-1997) — moderate difficulty, modifications required.

Also fits Accord (CD5) →
Verdict
Fits.
Verified entry · modifications required
Verified ✓
Difficulty
Moderate
Mods
Required
Category
Engine

Installation notes

Yes — the H22A1 engine and manual transmission from a 1993-1996 Prelude VTEC (BB1) fits a 1994-1997 Accord (CD5/CD7) with H-series swap mounts, the Prelude rear bracket and the Prelude H-series timing-side post mount. Hasport's CDH1 kit is built around the Prelude transmission and rear bracket. Innovative lists conversion kits for the CD5, CD7 and CE1 with H22/F22A engines and manual transmissions and says no hood trimming is required. The H22A1 is rated at 190 hp in the US Prelude VTEC.
ModsMods req.

Required modifications

Engine mounts: Hasport CDH1 (designed for the Prelude-style transmission and uses the Prelude rear bracket) or an Innovative 94-97 Accord conversion kit; Innovative sells different kits for EX (29751, H22/F22A) and DX/LX (29750) cars. Innovative requires the 92-01 Prelude H-series timing-belt post mount, Honda part 11910-P13-000. Innovative says no hood notching or trimming is needed. Also wiring/ECU, axles, shifter linkage, cooling and exhaust for the H22.

Caution

Important caveats

  • Innovative sells different kits for Accord EX and DX/LX cars; order by trim.
  • The Innovative kits need the 92-01 Prelude H-series post mount (11910-P13-000).
  • Hybrid Racing notes there is no single part number for this job; the kit depends on the engine and on the trim of the Accord.
  • The 1997-2001 Prelude H22A4 is a later version of the same engine family; confirm mount and post-mount fitment if using it.

No guide yet — write one or browse all guides.

Reference

H22A specs → LEB-H5 specs → B18A1 specs → K24A8 specs → K24A4 specs → H22A4 specs → EA specs → EC specs → ED specs → EL specs → EN specs → ER specs → ES specs → ET specs → F22A1 specs → F22A2 specs → F22A3 specs → F22A4 specs → F22A6 specs → F22A7 specs → F22A9 specs → H22A1 specs → H22A2 specs → H22A3 specs → H22A5 specs → H22A7 specs → H22A8 specs → PDE-1 Cylinder Head →

Done this swap?

Verify it and help the next builder.

Verified by 0 builders

Sources

4 refs
  1. 01 https://hasportperformance.com/products/cdh1/
  2. 02 https://innovativemounts.com/products/94-97-accord-ex-conversion-engine-mount-kit-h22-f22a-manual
  3. 03 https://www.hybrid-racing.com/products/innovative-mounts-94-97-accord-h22-f20b-swap-mounts
  4. 04 https://en.wikipedia.org/wiki/Honda_H_engine
Submitted by FitMyBuild research Added Updated

Not the swap you need? Request one →

Comments

(0)
Loading comments…